Rolling machine 4 Roller CNC

It belongs to four roller plate rolling machine. It wide used in the manufacture of pressure vessels machinery, Hydropower, construction and other industries of the barrel body pre bending, roll round, and also have a function of checking cycle and leveling.

The top roller driven by hydraulic motor. Through the friction between the metal plate and the top roller to drive the bottom roller and side roller rotate. And supply the torque for the bending plate. The bottom roller, side roller and drop end are all driven by hydraulic oil tank. The bottom roller move up and down, the side roller move along with an arc. The bottom roller raising to clamp the plate and the side roller title up to pre-bend the end of the plate.

WORKING PRINCIPLE

 

PERFORMANCE FEATURES

  • It’s easy to operate, rich shape bend
  • CNC control, digital readout for position of each rollers. High accuracy and precision circle
  • Full hydraulic drive, High efficiency and energy saving, the drive power is equivalent to the traditional 60% Once forming, the productivity is higher 50% - 80% than three roller bending machine
  • Aligning the material is convenient and accurate, avoid the wrong side phenomenon: Cone bending device
  • Permanent lubrication (bearing life without refueling)
  • The top and bottom roller clamp the plate during rolling without slipping
  • The minimum bending diameter of the cylinder can get to 1.1 times the diameter of the top roller, the surplus flat edge smaller than any type of other plate rolling machine
  • The carrying device and feeding device and support device can be installed easily

APPLICATION SCOPE

TECHNICAL PARAMETERS

Model Max.Bending thickness (mm) Pre-bending thickness (mm) Max.Working length of rolls (mm) Yield limit (Mpa) Top roller diameter (mm) Bottom roller diameter (mm) Side roller diameter (mm) Mainpower (Kw)
WM12-4x2000 4 3.5 2050 245 160 140 120 3
WM12-6x2000 6 5 2050 245 190 170 150 4
WM12-8x2000 8 6.5 2050 245 210 190 170 5.5
WM12-10x2000 10 8 2050 245 230 210 190 7.5
WM12-12x2000 12 10 2050 245 270 250 210 11
WM12-16x2000 16 13 2050 245 300 270 220 11
WM12-20x2000 20 16 2050 245 330 300 240 11
WM12-25x2000 25 20 2050 245 360 330 250 15
WM12-30x2000 30 25 2050 245 390 360 300 18.5
WM12-35x2000 35 28 2050 245 430 390 330 22
WM12-40x2000 40 32 2050 245 460 420 360 30
WM12-45x2000 45 36 2050 245 510 460 390 37
WM12-50x2000 50 40 2050 245 550 510 420 45
WM12-4x2500 4 3.5 2550 245 190 170 150 4
WM12-6x2500 6 5 2550 245 210 190 170 5.5
WM12-8x2500 8 6.5 2550 245 230 210 190 7.5
WM12-10x2500 10 8 2550 245 270 250 210 11
WM12-12x2500 12 10 2550 245 300 270 220 11
WM12-16x2500 16 13 2550 245 330 300 240 11
WM12-20x2500 20 16 2550 245 360 330 250 15
WM12-25x2500 25 20 2550 245 390 360 300 18.5
WM12-30x2500 30 25 2550 245 430 390 330 22
WM12-35x2500 35 28 2550 245 460 420 360 30
WM12-40x2500 40 32 2550 245 510 460 390 37
WM12-45x2500 45 36 2550 245 550 510 420 45
WM12-4x3000 4 3.5 3100 245 210 190 170 5.5
WM12-6x3000 6 5 3100 245 230 210 190 7.5
WM12-8x3000 8 6.5 3100 245 270 250 210 11
WM12-10x3000 10 8 3100 245 300 270 220 11
WM12-12x3000 12 10 3100 245 330 300 240 11
WM12-16x3000 16 13 3100 245 360 330 250 15
WM12-20x3000 20 16 3100 245 390 360 300 18.5
WM12-25x3000 25 20 3100 245 430 390 330 22
WM12-30x3000 30 25 3100 245 460 420 360 30
WM12-35x3000 35 28 3100 245 510 460 390 37
WM12-40x3000 40 32 3100 245 550 510 420 45
WM12-50x3000 50 40 3100 245 610 560 480 55
WM12-60x3000 60 48 3100 245 670 620 520 75